6ES7954-8LE03-0AA0

相似图像

SIMATIC S7，存储卡 用于 S7-1x00CPU/SINAMICS， 3，3V Flash，12 MB

CPU 1513F-1 PN

概述

• The CPU for standard and fail-safe applications with medium/highrequirements for program/data storage in the S7-1500 Controllerproduct range

• Can be used for safety functions up to SIL 3 according to IEC61508 and up to PL e according to ISO 13849

• High processing speed for binary and floating-pointarithmetic

• Used as central controller in production lines with central anddistributed I/O

• Supports PROFIsafe in centralized and distributedconfiguration 

• PROFINET IO IRT interface with 2-port switch

• PROFINET IO controller for operating distributed I/O onPROFINET

• PROFINET I-Device for connecting the CPU as an intelligentPROFINET device under a SIMATIC or non-Siemens PROFINET I/Ocontroller

• Isochronous mode

• Integrated Motion Control functionalities for controllingspeed-controlled, positioning and synchronized axes (gearing),support for external encoders, output cams/cam tracks andprobes

• Integrated web server with the option of creating user-definedweb pages

Note:
SIMATIC Memory Card required for operation of the CPU

应用

The CPU 1513F-1 PN is the CPU with a medium to large program anddata memory for standard and fail-safe applications that alsocontain distributed automation structures alongside central I/O. Itcan be used as a PROFINET IO controller or as distributedintelligence (PROFINET I-Device). The integrated PROFINET IO IRTinterface is designed as a 2-port switch, enabling a lineartopology to be set up in the system. In addition, the CPU offerscomprehensive control functionalities as well as the ability toconnect drives via standardized PLCopen blocks.

设计

The CPU 1513F-1 PN has:

• A powerful processor:
  The CPU achieves a command execution time as low as 25 ns perbinary command.

• Large work memory:
  900 KB for program, 2.5 MB for data

• SIMATIC Memory Cards as load memory;
  permit additional functions such as datalog and ArchiveFlexible

• Expansion capability:
  single-tier configuration with max. 32 modules (CPU + 31modules)

• Display with functions for

• Display of overview information such as station name, plantdesignation, location designation, etc.

• Displaying of diagnostic information

• Displaying of module information

• Showing display settings

• Setting of IP addresses

• Setting of date and time

• Switching the operating mode

• Resetting of the CPU to factory settings

• Disabling/enabling the display

• Enabling of protection levels

• Display of safety mode, overall signature and date of the lastdownload with signature change

• PROFINET IO IRT interface for connecting distributed I/O viaPROFINET

• Supports PROFIsafe in centralized and distributedconfiguration

功能

• Performance

• Faster command processing, depending on the CPU type, languageextensions and new data types

• Even shorter response times of the CPUs due to considerablyfaster backplane bus

• High-performance network connection:
  Each CPU is equipped with PROFINET IO IRT (2-port switch) asstandard interface.

• Integrated technology

• Connection of analog and PROFIdrive-capable drives viastandardized blocks (PLCopen)

• Trace functions for all CPU tags, both for diagnostics in realtime as well as for sporadic error detection

• Comprehensive control functionalities, e.g. easy to configureblocks for automatic optimization of the control parameters foroptimum control quality

• Security Integrated

• Password-based know-how protection against unauthorized read-outand modification of program blocks

• Copy protection for tying individual blocks to the serial numberof the SIMATIC Memory Card: The block can only run if theconfigured memory card is inserted in the CPU.

• 4-stage authorization concept:
  Communication to operator panels can also be restricted.

• Manipulation protection:
  The controller recognizes changed or unauthorized transmissions ofthe engineering data.

• Design and handling

• Display of overview information:
  E.g. Station name, plant designation, location identifier, etc.,diagnostic information, module information, display settings.

• Possible operations on the display:
  Set addresses, set date and time, select operating mode of CPU,reset CPU to factory settings, disable/enable display, activateprotection levels.

• Integrated system diagnostics

• System diagnostics information is displayed consistently and inplain text in the display, TIA Portal, operator panels and webserver, even for messages from the drives, and updated even if theCPU is in STOP mode.

• Integrated in the firmware of the CPU, no special configurationis required

• SIMATIC Memory Card (required for operation of the CPU)

• Used as plug-in load memory or for updating the firmware.

• Also for storing additional documents or csv files (for recipesand archives)

• Creation of data blocks for storage/reading of data via SFCs ofthe user program

• Data log (archives) and recipes

• Storage of csv files for recipes and archives on the SIMATICMemory Card;
  easy access to plant-relevant operating data using Office tools andvia web server

• Easy access to configuration data of the machine by means of aweb browser or SD card reader (two-way data exchange from and tothe PLC)

• Programming of the standard program section

• Programming as of STEP 7 V12 SP1

• Programming of the fail-safe program section

• Programming of the safety-oriented program section with the"STEP 7 Safety Advanced" option package. STEP 7 Safety Advanced V12can run under SIMATIC STEP 7 Professional V12 SP1.

西门子PLC编程软件有哪些？西门子PLC编程软件怎么下载？

西门子PLC编程软件有哪些?西门子plc编程软件怎么下载?今天就跟大家分享下常用的几款西门子PLC编程软件，一些简单的软件介绍和软件下载方式就是今天的主要内容了，一起看看吧!

1、西门子S7-200PLC编程软件step7micwin_v4sp9完整版

软件简介：

西门子plc s7-200编程软件Zui新版本(2012.3) step7micwin_v4sp9完整版，全面支持windows7。安装完后，打开软件，初次为英文版，点击tools(左上角自左-右第6个)选择Zui下面的options(自上而下第15个)单击，出现又一个画面，在左边选择第一个选项general，就出现了语言选项，选择Zui下面的那个(chinese)也就是中文。点击ok按钮，一路回车下去，直到软件关闭，再打开时就是中文的啦!

软件下载：

西门子S7-200PLC编程软件step7 micwin_v4sp9完整版下载：https://www.jcpeixun.com/software/378

2、西门子博途软件(V13/V14/V15)合集

软件简介：

博途V13破解版是一款非常好用的数控编程软件，软件完美支持Win10操作系统，适用于组态SIMATICS7-1200、S7-1500、S7-300/400和WinAC控制器系列的工程组态软件，可谓是用户进行编程的zuijia选择。

西门子博途V14软件是一款功能强大的数控编程软件，软件是由西门子打造的全集成自动化编程软件，多用于PLC编程与仿真操作，新版本增强了性能，提高了兼容性，有需要的赶快来试试吧!

博途V15破解版是西门子带来的全集成自动化工具，此软件能够为你缩短了产品上市时间，内置通过仿真工具，通过额外的诊断和能源管理功能提高工厂的生产率，并通过连接到管理级别为您提供更广泛的灵活性。

软件下载：

西门子博途软件V13/西门子博途软件V14/西门子博途软件V15下载：https://www.jcpeixun.com/software/384

3、西门子触摸屏软件WinCCflexible SMART V3

软件简介：

wincc smartv3是一款可以支持用户这进行使用win10系统的时候，运行的西门子编程软件系统;更加的快捷，方便;软件的使用简单，操作方便，是款非常值得大家信赖的编程工具，需要的朋友赶快将WinCCflexible SMART V3 下载来使用试试吧!

软件下载：

西门子触摸屏软件WinCC flexible SMART V3下载：https://www.jcpeixun.com/software/493

4、西门子TIAPortal V17

软件简介：

西门子TIA Portal V17中文简称博途V17，是西门子工业自动化Zui重磅的软件产品，V17新增加CFC功能、1518HFCPU等功能，提供了丰富的功能模块，可以有效地缩短工程时间。与PLCSIM、NX MCD、ProcessSimulate、SMIT、PlantSimulation、Amesim等数字化仿真设计软件之间集成越来越紧密，越来越多的强大的通讯功能(OPC UA、MQTTWebAPI.....)

安装必须满足的Zui低硬件要求：

硬件

处理器 Intel® Core™ i3-6100U, 2.3Ghz 或更高

内存 8 GB 或更多

至少有 20GB 可用内存空间的硬盘 S-ATA

显示器 1024 x 768 或更高

软件下载：

西门子TIA Portal V17软件下载：https://www.jcpeixun.com/software/473

5、西门子博途V16

软件简介：

Siemens Simatic TIA PortalV16简称博途V16，是一款由西门子推出的一款自动化编程软件，软件提供了丰富的功能模块，可以有效地缩短工程时间，提升工程师的工作效率，软件为控制器、人机接口(HMI)和驱动器以及共享数据存储和一致性(例如在配置、通信和诊断期间)提供了标准化的操作概念，并为所有自动化对象提供了强大的库

软件下载：

西门子博途V16软件下载：https://www.jcpeixun.com/software/464

6、西门子PLCS7-200仿真软件

软件简介：

西门子plc(s7-200)仿真软件是由西门子打造的实用仿真软件。西门子plc(s7-200)仿真软件是绿色免安装软件，下载解压后就可以直接打开使用，简单便捷。西门子plc(s7-200)仿真软件还有支持中断、函数、PID运算等特色功能等你来体验。

软件下载：

西门子PLC S7-200仿真软件下载：https://www.jcpeixun.com/software/47

7、西门子授权软件

软件简介：

西门子授权软件是针对西门子软件的授权过期问题的解决办法，运行西门子授权软件后会自动检测你当前安装在计算机上的西门子软件,并自动给出推荐的授权

软件下载：

西门子授权软件下载：https://www.jcpeixun.com/software/377

8、西门子S7-300PLC编程软件STEP7V5.5CH

软件简介：

西门子s7-300编程软件Step7 v5.5是一种可以用于西门子系列工控产品包括SIMATICS7，M7，C7和基于PC的WinAC的编程，监控和参数设置，是SIMATIC工业软件的重要组成部分，本站提供了西门子S7-300Step7简体中文版下载地址，欢迎有需要的朋友们前来下载使用。Step7

软件安装注意事项

1，确保操作系统能够安装Step7软件

软件下载：

西门子s7-300编程软件Step7 v5.5下载：https://www.jcpeixun.com/software/380

9、西门子S7-200-PC_Access_V10SP5

软件简介：

专用于S7-200 PLC的OPC Server软件，它向OPC 客户端提供数据信息，可以与任何标准的OPCClient(客户端)通讯。可以实现WinCC与S7-200/S7-200CN系列通讯。

软件下载：

西门子S7-200-PC_Access_V10SP5软件下载：https://www.jcpeixun.com/software/495

10、西门子S7-300仿真软件PLCSIMV5.4

软件简介：

s7-plcsim是西门子推出的plc仿真软件，可以替代西门子硬件PLC的仿真软件，可以方便仿真用户在不依赖真实的PLC下进行S7程序的测试操作，该程序可以大大地消除程序开发的早期错误，降低开发成本，提高程序开发的质量，有需要的赶快下载吧!

软件下载：

西门子S7-300仿真软件PLCSIM V5.4下载：https://www.jcpeixun.com/software/381

下载西门子plc编程软件到技成培训网的下载中心可以免费下载，还有详细的软件安装视频教程哦，快来下载安装吧。